Component Video and Digital Audio PLUS IR Repeater Over Cat 5 Cat 6
Complete Component Video and Digital Audio PLUS IR Repeater over CAT5e CAT 6 Extender Kit.
This CAT 5 / Cat 6 active extender kit extends Component Video and digital Audio up to 328ft.
By using basic or shielded cat 5 or cat 6 cables the Twisted pair extenders long distance distribution of video and audio as well as controlling the devices through the integrated IR repeater.
Our units use the industry standard simple plug in RJ45 connector commonly found on Cat 5 Cat 6 network cables for easy installation.
IR system Includes -
IR receiver and 1 dual IR emitters that deliver commands to 2 components, expandable up to 4 devices. The integrated IR-Repeater is made up of a receiver that picks up the signal from your remote, and emitters for sending the signals to the components. Both the IR emitters and receiver comes with a 10ft cable attached to it for your convince.
Working with Plasma and LCD Displays - Although not designed to reject interference from plasma or LCD TVs, you can work around this by installing the IR receiver eye in an area that isn't exposed directly to the TV screen - at the back of a bookshelf, on the wall below or next to the TV - somewhere the eye can't "see" the TV image. Just make sure you still have a direct line of sight from the eye to your normal seating position. The Hidden IR System can be used in a room with a plasma TV or LCD display by installing the IR receiver in an area where it can't "see" the TV image - behind the TV or in a bookcase, for example.
The IR repeater and dual IR emitters to control 2 devices connected to the device. You can purchase an additional Dual IR emitter to control another 2 devices in our store.
Features -Converts analog video for transmission over CAT5 CAT6 cable for distances up to 328ft
Can handle virtually any analog video signal and any analog or digital audio signal on any port regardless of silk screen label
Color coded RCA jacks to industry codes for easy use.
Red – Green - Blue - Orange for SPDIF Digital Audio
IR control though the integrated IR repeater
Color: Black
Component Video and Digital Audio Specifications –
Interface:
Video 3x RCA Jack
Audio 1x RCA Jack
Impedance
Video: 100 ohm Unbalanced
Bandwidth:
Video: DC- 60 MHz
Distance:
Video: Category 5e UTP cable up to 100 Meters (328 ft)
* Video Distance:
480p = 100 meters ( 328ft )
720p 1080i = 75 meters ( 246 ft )
1080i = 50 meters (164 ft )
* Audio Distance: = 100 meters ( 328ft )
IR Repeater Specifications -
Receive Frequency Range – 34 kHz to 40 kHZ
Transmit Frequencies – 38 kHz
Power – 12VDC, 31 mA Max – With supplied adapter
CFL friendly – Allows installation with CFL lighting
Cord Length – 10 ft on IR emitter and IR Reciever
Blue Confirmation LED on IR receiver
Included in the package -
Component Video and Digital Audio Transmitter
Component Video and Digital Audio Reciever
Surface mount IR Receiver
Dual Head IR emitter
Ac Adapter
Instructions
NOTES – Since 1 Additional Dual IR emitters can be added they are available in our store.
Other information –
Many new homes and office buildings already contain structured cabling systems of not only electrical and phone wiring, but also inexpensive cat. 5 twisted pair cable, which is commonly used as a data line. Take maximum advantage of this existing wiring by adding baluns to each end. These small transformers convert audio and video signals from unbalanced to balanced and vice versa, making the necessary impedance adjustments for A/V signal transmission between different wiring systems. This means that you can run your signal over inexpensive cat. 5 wiring, rather than rewiring your home in order to send video and audio signals from room to room.
Ideal for such devices as DVD players, satellite receivers, Cable boxes, Video Games, plasma and LCD displays, projectors, monitors, amplifiers, switchers, and other equipment supporting audio or video signals and transmitted via cost-effective unshielded twisted pair (UTP) cable in a point-to-point configuration.
